A green-gray adhesion promoter designed to enhance the performance of Cromax™ products on unprimed polyolefin or non-polyolefin plastic parts.
| Type | Plastic Adhesion Promoter |
| Substrates | Unprimed rigid, semi-flexible or flexible automotive plastic parts |
| VOC | 7.0 lb/gal (840 g/l) category compliant |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 6 | 012500272665 | 01250027266 |
| Components | Parts by Volume |
|---|---|
| 2330S™ | Ready-to-spray |
| Pot Life | Indefinitely |
Apply 1 medium-wet coat beyond the entire repair area. After the recommended dry time, Plas-Stick® 2330S™ Plastic Adhesion Promoter will still be tacky. Follow with the appropriate primer or topcoat.
Refer to technical data sheet
| Air Dry | Force Dry |
|---|---|
| To primer: 25 minutes | Cycle time: 15 minutes at 140°F |
| Coverage (Ft2) | 240 |
| Dry Film Thickness (mil) | 0.35-0.5 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
