A green-gray adhesion promoter designed to enhance the performance of Cromax™ products on polyolefin or non-polyolefin unprimed automotive plastics. It is also great for repairing small areas of bare plastic without the need for a spray gun.
| Type | Plastic Adhesion Promoter |
| Substrates | Unprimed rigid, semi-flexible or flexible automotive plastic parts |
| VOC | 2.50 MIR, Polyolefin Adhesion Promoter Category Compliant |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Can | 6 | 012500504759 | 01250050475 |
| Components | Parts by Volume |
|---|---|
| A-2330S™ | Ready to spray |
| Pot Life | Indefinitely |
Apply 1 medium-wet coat beyond the entire repair area. After the recommended dry time, Plas-Stick® A-2330S™ Polyolefin Adhesion Promoter will still be tacky. Follow with the appropriate primer or topcoat.
| Air Dry | Force Dry |
|---|---|
| To primer: 25 minutes | Cycle time: 15 minutes at 140°F |
| Coverage (Ft2) | 120 |
| Dry Film Thickness (mil) | 0.35-0.5 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
PLAS-STICK® A-2320S™ PLASTIC CLEANER
Removes surface contaminants
Convenient aerosol
Eliminates static
PLAS-STICK® 2319S™ PLASTIC CLEANER
For primed ABS, Lexan
Plastic cleaner
For primed plastic, fiberglass
