A productive, chromate free, ready-to-spray filler that cures upon exposure of UV light in mere seconds and is ready for sanding immediately after cure. Excellent film build , filling and leveling characteristics provide high-quality results.
| Type | Primer-Surfacer |
| Substrates | Through-hardened, sanded paintwork Sanded, solvent resistant OEM primers used on replacement parts Bare metal, galvanized metal, and aluminum; sanded Standox Primers Standox 2K EP Primer Surfacer/2K EP Primer Aerosol Standoflex Plastic Primer Silver/Plastic Primer Silver Aerosol For substrate preparation information, see Standox Painting System S1! |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Aerosol Spray | 6 | 4024669162363 | 4024669162363 |
| Liter | 6 | 4024669162356 | 4024669162356 |
| Components | Parts by Volume |
|---|---|
| Ready-to-spray |
| Pot Life | Unlimited when properly stored |
Apply 2 to 3 coats. Flash 1 minutes between coats. Do not spray to opacity.
HVLP: 1.3 - 1.4 mm
Approved Transfer Efficiency: 1.3 - 1.4 mm
Please refer to gun manufacturer and local legislation for proper spray pressure recommendations. Using reduced air pressures may result in higher film build which affects the ability of the UV primer to cure.
| Air Dry | Force Dry |
|---|---|
| To UV Cure: 3 minutes |
See UV Cure instructions in TDS for important technical remarks.
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information.
Because working with UV light equipment may pose potential safety and related hazards, we recommend following all instructions for use provided by the equipment manufacturers.
