V-2940S™ LF DTM EPOXY PRIMER GRAY

Description

A two-component, non-isocyanate, non-sanding primer with superior corrosion resistance and excellent adhesion for direct-to-metal applications. Intended for use as a metal treatment under, or a sealer over primer surfacers. It can be applied over cleaned aluminum, galvanized steel and stainless steel or over appropriately sanded or blasted carbon steel, sanded fiberglass and sanded OEM e-coat primers.

Features

Non-sanding
Superior corrosion resistance
Excellent adhesion

Product Details

Type	Primer-Sealer
Technology	Epoxy
Substrates	Refer to technical data sheet
VOC	2.1 lb/gal (250 g/l) category compliant

Available Sizes

Size	Case Qty	UPC	GMC
Gallon		012500332987	01250033298

Mixing Instructions

Components	Parts by Volume
V-2940S™	2
V-2905S™ / V-2907S™	1

Additive	Reducer: Up to 5% V-1075S™ (for 2.1 VOC)
Viscosity	20-22 seconds in a Zahn #2 cup
Pot Life	12 hours at 70°F in a sealed container

Application Instructions

Application

Apply 1 medium-wet coat

Gun Setup & Air Pressure

Refer to technical data sheet

Dry Time

Air Dry	Force Dry
To nib sand: 30-60 minutes	Cycle time: 20 minutes at 140°F
To topcoat: 45-60 minutes (1 coat DTM)	Cool down: 15 minutes

Coverage (Ft²)	555
Dry Film Thickness (mil)	0.8-1.2

Safety

Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.