A UV primer-surfacer developed to eliminate process steps for ultra-fast repairs. It can be applied directly to metal with a very smooth surface and it dries quickly under low-intensity UV lamps. The entire coating is fully cured on exposure and it can be sanded immediately on cooling.
| Type | Primer-Surfacer |
| Substrates | Properly treated steel, aluminum and galvanized Properly sanded & prepared steel, galvanized steel, aluminum, OEM finishes and OEM replacement parts Direct to Plas-Stick® 2332S™ or 2330S™ Adhesion Promoter Direct to VariPrime® 615S™ Self-Etching Primer Direct to 22880S™ Low VOC Etch Primer Cured and sanded epoxy primer |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 6 |
| Components | Parts by Volume |
|---|---|
| LE3130S™ | Ready-to-Spray |
| Viscosity | 10-14 seconds in a Zahn #3 |
| Pot Life | Indefinite |
Apply 2 wet coats to a dry film thickness of 4.0-5.0. Flash 1 minute between coats.
Refer to technical data sheet
| Air Dry | Force Dry |
|---|---|
| Refer to TDS | Refer to TDS |
| Coverage (Ft2) | 627 |
| Dry Film Thickness (mil) | 6 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
VARIPRIME® 615S™ SELF-ETCHING PRIMER
Direct-to-metal adhesion
Self-etching
Excellent corrosion resistance
