A one-component putty based on a special acrylic resin combination that requires no additional components for drying. Axalta™ 1K Fine Putty 705 has a neutral light beige color and is suitable for touching up prepared substrates or can also be applied on bare sheet metal. Axalta™ 1K Fine Putty 705 spreads on very easily and pore-free and after a short drying time can be very easily sanded.
| Type | Putty & Glaze |
| Substrates | Old or original paintwork well sanded and cleaned (except reversible substrates, example: lacquer) Surfaces pretreated with 2K polyester products and then finely sanded and cleaned Fully cured 2K Surfacers or 2K Epoxy Primer-surfacer sanded and cleaned steel |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Tube | 12 | 012500073545 | 1250007354 |
| Components : Axalta 1K Fine Putty 705 | Parts by Volume |
|---|---|
| Ready-to-Use |
Apply with a putty knife or razor blade in thin coats approximately 10 minutes apart.
| Air Dry | Force Dry |
|---|---|
| Approx. 30 - 60 minutes at 68°F/20°C | IR - Approx. 4 - 6 minutes |
| Sanding: P400 – 800 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
