A flex additive designed to improve the adhesion, chip resistance and flexibility of UltraProductive Primers and Sealers over rigid, semi-flexible and fully-flexible metal
| Type | Additive |
| Substrates | Flexible plastics that have been properly prepared. Refer to the Axalta Flexible Plastics Repair Procedures Flow Chart for schematic representation. |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 012500345185 | 01250034518 |
| Components | Parts by Volume |
|---|---|
| 4004S™ | 4 |
| 4075S™ / 4085S™ | 1 |
| 4950S™ | 1 |
| Pot Life | 50 minues |
Apply 2–3 light coats to achieve proper fill. Avoid excess film build. Flash 5–10 minutes between coats.
Refer to technical data sheet
| Air Dry | Force Dry |
|---|---|
| To sand: 2 hours | 30 minutes at 140°F (flash 10 minutes before applying heat) |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
4004S™ ULTRA PRODUCTIVE 2K PRIMER FILLER
Spot, panel repairs
Excellent topcoat holdout
Productive dry times
