A two-component, non-sanding primer with excellent corrosion resistance and adhesion for direct-to-metal applications. It is ideal for sandthrough repairs as a direct to metal applied to sanded or blasted steel, well cleaned aluminum, and galvanized or stainless steel without sanding.
| Type | Primer-Sealer |
| Technology | Epoxy |
| Substrates | OEM replacement parts Properly sanded or blasted steel Properly cleaned or sanded aluminum, galvanized steel, or stainless steel Properly sanded SMC/fiberglass/body fillers/polyester putties Under all Axalta primers |
| VOC | 4.6 lb/gal (550 g/l) category compliant |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Gallon | 012500272702 | 01250027270 |
| Components | Parts by Volume |
|---|---|
| 2510S™ | 2 |
| 2503S™ / 2505S™ / 2507S™ / 2509S™ | 1 |
| Viscosity | 18-20 seconds in a Zahn #2 cup |
| Pot Life | 9 hours at 70°F in a sealed container |
Apply 1 medium-wet coat
Refer to technical data sheet
| Air Dry | Force Dry |
|---|---|
| To nib sand: 30-60 minutes | Cycle time: 30 minutes at 140°F |
| To topcoat: 20-30 minutes (1 coat) |
| Dry Film Thickness (mil) | 0.8-1.1 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
