PLAS-STICK® 2344S™ ADHESION PROMOTER GRAY

image


Description

A 4.5 VOC compliant plastic adhesion promoter system designed to eliminate a step in the plastic repair process. Now you simply clean the plastic part, apply the 234XS Plas-Stick® Adhesion Promoter, then topcoat directly with waterborne or solvent borne basecoat. The adhesion promoter is ValueShade® 4.

Features

  • Eliminates repair steps
  • Gray in color
  • Valueshade® 4

Product Details

Type Plastic Adhesion Promoter
Substrates Suitable Substrates: Raw plastic parts commonly found on vehicles, including: PP, TPO, PP/EPDM, ABS and PC PUR.

Not Recommended for pre painted substrates
VOC 4.5 VOC Compliant

Available Sizes

Size Case Qty UPC GMC
Quart 6

Mixing Instructions

Components Parts by Volume
2344S™ Adhesion Promoter 4
LE11X5S (X= 6, 7, 8, 9) Activator 1
LE1275S™ 1
2321S™ 1
Additive
  • Flex Additive: Not required
  • Accelerator: Not required
  • Fish Eye Eliminator: Not required
  • Flex Additive: Not required
Viscosity 16-18 seconds in a Zahn #2 cup at 70°F (21°C)
Pot Life 60 minutes at 70°F (21.1°C)

Application Instructions

Application

The following steps describe the process for using Plas-Stick® 2310S™ Plastic Cleaning Paste to prepare new unprimed plastic parts:

  • 1) Pre-wash with warm water and Plas-Stick® 2310S™ using a fine scuff pad.
  • 2) Rinse thoroughly making sure the paste does not dry on the surface.
  • 3) Wash again with warm water and Plas-Stick® 2310S™ using a fine scuff pad.
  • 4) Rinse thoroughly making sure the paste does not dry on the surface. Dry the part thoroughly immediately following the rinse.
  • 5) Apply 1 wet coat of adhesion promoter.
  • Gun Setup & Air Pressure

    Refer to technical data sheet.

    Dry Time

    Air Dry Force Dry
    To sanding: 20 minutes Cycle time: 10 minutes at 110°F
    To topcoat: 20 minutes Cool down: 10 minutes
    Coverage (Ft2) 477
    Dry Film Thickness (mil) 0.8 - 1.0

    Safety

    Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.

Recently Viewed Products

You may also be interested in

PLAS-STICK® 2341S™ ADHESION PROMOTER WHITE

Eliminates repair steps
White in color
ValueShade® 1

PLAS-STICK® 2347S™ ADHESION PROMOTER DARK GRAY

Eliminates repair steps
Dark gray in color
ValueShade® 7