A two-component, fast drying, easy-to-sand urethane primer that delivers good filling properties.
| Type | Primer |
| Technology | Polyurethane |
| Substrates | For use with: Properly cleaned and sanded cured finishes and fiberglass gelcoat substrates Metalok Adhesion Promoter 230S™ Metalok Pretreatment Coatings 250S™ and 235S™ Properly cleaned and chemical treated metal substrates |
| VOC | Please refer to VOC Compliance Charts for compliance |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Gallon | 4 | 012500152769 | 01250015276 |
| Components | Parts by Volume |
|---|---|
| 1380S™ | 4 |
| 194S™, 294S™ or 15309S™ | 1 |
| Additive |
|
| Pot Life | 2 hours with 389™ at 70°F |
Apply medium-wet coats (0.8-1.0 mils per coat) using a cross-coat technique. No flash between coats is required.
Refer to technical data sheet
| Air Dry | Force Dry |
|---|---|
| To touch: 30-45 minutes | Force dry: 30 minutes at 160-180°F (71-82°C) |
| Print free: 2-3 hours |
| Coverage (Ft2) | 914 |
| Dry Film Thickness (mil) | 1.6-2.0 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information.
