Standox®
Standoblue® 1K Waterborne Primer Surfacer
Product Details
| Type | Primer-Surfacer |
| Substrates | Bare steel, sanded (See Important Remarks.) Zinc coated steel or aluminum, sanded Sanded, solvent resistant OEM primers used on replacement parts Polyester products and 2K Fillers, sanded Through-hardened, sanded paintwork For substrate preparation information see Standox Painting System S1! |
Available Sizes
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| 3.5 Liter | 2 | 4024669162318 | 4024669162318 |
Mixing Instructions
| Components : Spot Repair / Single Panel | Parts by Volume |
|---|---|
| Standohyd 1K Primer Surfacer Gray | 1 |
| Standohyd VE Water | +5-10% |
| Components : Wet-on-Wet / Small Areas | Parts by Volume |
|---|---|
| Standohyd 1K Primer Surfacer Gray | 1 |
| Standohyd VE Water | +10-15% |
Viscosity
Mix ratio 1: 23-28 seconds
Mix ratio 2: 18-20 seconds
Mix ratio 2: 18-20 seconds
Application Instructions
Application
Spot repair / panel: Apply 2 to 3 coats to 3 to 4 mil. Flash 10 minutes between coats until matt.
Wet-on-wet / small area: Apply 1.5 coats to 1.0 to 1.4 mil. Flash 5-10 minutes between coats, and 30 minute final flash until matt.
Wet-on-wet / small area: Apply 1.5 coats to 1.0 to 1.4 mil. Flash 5-10 minutes between coats, and 30 minute final flash until matt.
Gun Setup & Air Pressure
Please refer to TDS.
Dry Time
| Air Dry | Force Dry |
|---|---|
| 3-5 hours | 30 minutes at 140°F after 5 minute flash |
| IR: 15-20 minutes after 5 minute flash |
Dry Film Thickness (mil)
3.0-4.0 mil
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN