Montana
Montana Big Sky™ System 10 Acrylic Enamel Color System
Montana Big Sky™ System 10 Acrylic Enamel Color System
This acrylic enamel system is designed to offer a cost effective, fast drying, durable, andeasy-to-use single stage system for overall automotive refinishing. When activated,Montana Big Sky System 10 has very good chemical resistance and gloss retention.
Features
- Easy to Use
- Excellent Chemical Resistance
- High Gloss Finish
Product Details
| Type | Single-Stage Topcoat |
| Substrates | • Sanded OEM Finishes • Cured Aged Finishes • EZ543 EZ-Fill Acrylic Primer Surfacer (sealed) • PS3042 / PS3044/ PS3045 Epoxy Prime • PS5008A/ PS5009A Urethane Primer/Sealer • PS5011/PS5012A/PS5015 2.1 VOC 2K Primer/Surfacer Note: These substrates may be directly topcoated: however, we suggest sealing prior tocolor coating for optimum results. |
| VOC | 5.00 lbs/gal (599 g/l) - max |
Available Sizes
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 12 | ||
| Gallon | 4 | ||
| 5 Gallon |
Mixing Instructions
| Components | Parts by Volume |
|---|---|
| System 10 | 8 |
| MP1050 | 1 |
| TH4800/TH4900/TH4700 | 2 |
Viscosity
N/A
Pot Life
4 – 6 hours at 75°F/23°C
Application Instructions
Application
As an overall or full-panel repair
Allow appropriate dry times for primers and sealers. Confirm color match is appropriate by testing color prior to application. Strain paint prior to application. Apply one medium wet coat and allow 15 – 20-minute flash or until surface is hand slick. Apply a 2nd full wet coat. If a 3rd coat is needed, allow 20-minute flash between 2nd and 3rd coat. For best results, do not apply more than 3 coats. If metallics are being applied, apply one fog coat immediately after last coat, holding the spray gun back an additional 2” – 3”. Raising the air pressure a few pounds will help even out metallics.
Allow appropriate dry times for primers and sealers. Confirm color match is appropriate by testing color prior to application. Strain paint prior to application. Apply one medium wet coat and allow 15 – 20-minute flash or until surface is hand slick. Apply a 2nd full wet coat. If a 3rd coat is needed, allow 20-minute flash between 2nd and 3rd coat. For best results, do not apply more than 3 coats. If metallics are being applied, apply one fog coat immediately after last coat, holding the spray gun back an additional 2” – 3”. Raising the air pressure a few pounds will help even out metallics.
Gun Setup & Air Pressure
Refer to Technical Data Sheet.
Dry Time
| Air Dry | Force Dry |
|---|---|
| Dust free: 30 minutes Dry to Handle: 20 – 24 hours |
|
| To Buff/Compound: 24 – 36 hours Cure: 7 days |
Coverage (Ft2)
482
Dry Film Thickness (mil)
1.00 mil ± .20 mils per coat
Special Instructions
Safety
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. For use by professional, trained painters.
Packaging Information
You must be an Axalta Coating Systems authorized distributor to view pricing information. Please Login or contact us to learn more.
LOGIN