Metalux MX9337 Grey 2K Sealer is a two-component non-sanding urethane sealer designed to apply smoothly and maintain superior color and gloss retention for high quality finishes. These urethane sealers are designed to increase intercoat adhesion while providing a uniform ground coat over repairs.
| Type | Sealer |
| Technology | Urethane |
| Substrates | Thoroughly sanded OEM finishes adjoining metal. Thoroughly sanded and cured paint adjoining metal. Properly sanded 2K primers. Properly cleaned and prepared steel, aluminum, galvanized steel following an etch primer. Properly prepared semi-rigid plastic and fiberglass. |
| VOC | 4.6 lbs/gal |
| Size | Case Qty | UPC | GMC |
|---|---|---|---|
| Quart | 6 | 012500423302 | 1250042330 |
| Gallon | 4 | 012500423517 | 1250042351 |
| Components | Parts by Volume |
|---|---|
| Metalux MX9337 Grey 2K Sealer | 4 |
| Metalux 9082, 9091, or 9092 Hardener | 1 |
| Viscosity | 16-17 seconds in a Zahn #2 cup |
| Pot Life | 1 hour at 70°F (21°C) |
Apply a single even wet coat. Allow to flash 15 minutes before topcoating with basecoat. NOTE: Large areas of bare metal need to be coated with an etch primer prior to sealer application.
| Air Dry | Force Dry |
|---|---|
| To topcoat: 15 minutes 77°F (25°C) |
| Coverage (Ft2) | 575 |
| Dry Film Thickness (mil) | 0.75-1.0 |
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. For use by professional, trained painters.
Metalux® MX9338 Dark Grey 2K Sealer
Increase intercoat adhesion
Non-sanding sealer
Uniform ground coat
