Montana Big Sky™ PS3042 2K Epoxy Primer Light Gray

Description

Montana Big Sky PS3042 Epoxy Primer two-component, chromate-free epoxies are designed for use as medium fill primers that provide optimum adhesion with excellent corrosion protection for bare substrates. Epoxy Primer may also be applied as a sealer to ensure greater inter-coat adhesion, chemical resistance, and color holdout. Epoxy Primer is a full epoxy resin that utilizes a non-induction catalyst, used to increase productivity for automotive and fleet refinishing. If required, Epoxy Primer has a 3.5 lbs/gal VOC catalyst, used for fleet and light industrial applications.

Features

Good Color Holdout
Chromate-Free

Product Details

Type	Primer
Substrates	• Properly cleaned and conditioned steel, stainless, aluminum, galvanized steel, copper, and brass. • Thoroughly sanded OEM and cured paint. • Cured and sanded body filler. • Sanded Fiberglass and SMC. • Properly prepared plastic. Note: Do Not use over soluble substrates, DTM, Acid Etch Primer, lacquer primer or lacquer finishes.
VOC	4.6 lbs/gal (551 g/l)

Available Sizes

Size	Case Qty	UPC	GMC
Quart	12	842027102837
Gallon	4	842027102820

Mixing Instructions

Components : Normal Build	Parts by Volume
PS3042	1
PA3040E or PA3040V	1

Components : Primer-Sealer	Parts by Volume
PS3042	1
PA3040E or PA3040V	1
TH035/TH036/TH037	1/4
Sealer Option: use ¼ part reducer

Viscosity	N/A
Pot Life	16 hours @ 75°F/23°C

Application Instructions

Application

PRIMER APPLICATION
Apply in single wet coats, allowing 15 minute, flash between coats. Apply 1 - 2 coats, depending on desired film build. A light coat of body filler may be applied over 1 coat of Epoxy Prime™ after 2 hours at 75°F/23°C. If two coats of Epoxy Prime™ are applied, wait overnight before applying filler.
SEALER APPLICATION
Apply 1 single wet coat of Epoxy Prime™ reduced as a sealer, to create a uniform base. Allow to flash for 45 - 60 minutes at 75°F/23°C before applying topcoats.

Gun Setup & Air Pressure

Refer to Technical Data Sheet.

Dry Time

Air Dry	Force Dry
To sand Primer: Best Overnight
To topcoat Primer: 1 hour per coat to 24 hours at 75°F/23°C Sealer: 45 minutes per coat to 6 hours at 75°F/23°C

Coverage (Ft²)	1:1 529; 1:1:¼ 469
Dry Film Thickness (mil)	See Technical Data Sheet

Safety

Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Safety Data Sheet for safety information. For use by professional, trained painters.