CROMAX® PRO WATERBORNE BASECOAT

Description

A 3.5 lb/gal (420 g/l) VOC compliant, ultra-productive waterborne basecoat that delivers single-visit application with 1.5-coat coverage for the majority of colors and no flash time between coats to reduce steps in the repair process. Solid, metallic and pearl colors are clean and bright to easily and accurately match OEM finishes. Compatible with all Cromax; clearcoats.

Features

Solid, metallic and pearl colors
Single-visit, 1.5 coat application
No flash time between coats

Product Details

Type	Basecoat
Technology	Waterborne
Substrates	All OEM finishes and Cromax® 2K primers and sealers. Do not use over ChromaBase® "4 to 1" Undercoats.
VOC	3.5 lb/gal (420 g/l) category compliant

Available Sizes

Size	Case Qty	UPC	GMC

Mixing Instructions

Components	Parts by Volume
Cromax® Pro	up to 30%
WB2040™ / WB2045™
WB2091™

Additive	Activator: WB2075™
Viscosity	Measuring viscosity is not necessary since the colors are ready to spray after the addition of controller
Pot Life	Refer to technical data sheet

Application Instructions

Application

Apply 1 medium coat at a gun distance of 8-10 inches from the surface to achieve 75% opacity, followed immediately with one light coat at a gun distance of 12-15 inches. Apply coats wet-on-wet (Do not flash between coats). Flash until flat before clearcoating.

Gun Setup & Air Pressure

Refer to technical data sheet

Dry Film Thickness (mil)	0.4-1.5

Safety

Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.