A UVA primer-surfacer developed for ultra-fast spot repair processes. It can be applied directly to metal with a very smooth surface and it dries quickly under low-intensity UV lamps. The entire coating is fully cured on exposure and it can be sanded immediately on cooling.
|Substrates||Properly treated steel, aluminum and galvanized
Properly sanded & prepared steel, galvanized steel, aluminum, OEM finishes and OEM replacement parts
Direct to Plas-Stick® 2332S™ or 2330S™ Adhesion Promoter
Direct to VariPrime® 615S™ Self-Etching Primer
Direct to 22880S™ Low VOC Etch Primer
Cured and sanded epoxy primer
|VOC||1.55 MIR, Auto Body Primer Category Compliant|
|Components||Parts by Volume|
For small spot repair, 8” x 8” or smaller. Shake the aerosol for 2 minutes after the mixing marble inside is heard and spray to test application. Apply 2 to 3 coats. Flash 1 minute between coats.
|Air Dry||Force Dry|
|Flash before UV cure: 2 minutes|
|Dry Film Thickness (mil)||3.0-5.0|
Refer to TDS for UV cure procedure and times.
Refer to the product Technical Data Sheet for complete directions for use. Refer to the product Material Safety Data Sheet for safety information. This product may be restricted in it's use and mixing ratio in VOC regulated areas. Refer to your area VOC Compliance Chart.
Leaves no surface residue
Solid, metallic and pearl colors
Best-in-class metallic flake control
Spot, panel repairs
Dries in seconds
Direct to metal